HEYLOVE - Frame Gel "Bud"
HL-FG30-009
FRAME gel - a versatile gel for extensions available in 13 shades
Packaged in a jar with a pump for gel dispensing.
Color: lilac-pink
Consistency: medium
Volume: 30 ml
Manufacturer: HELLO. by NAILSMADE
Country of origin: Ukraine
Features:
- For modeling, correction, strengthening, and extension without dust;
- Medium consistency, closer to liquid;
- Self-leveling;
- Flexible in a thin layer, maintains an arch without deforming in a thick layer;
- Creates a strong, chip-resistant coating;
How to use:
- Sand the plate with a 180 grit file or a 100 grit buffer.
- Wipe off the dust with a degreaser, especially under the cuticle and in the side pockets.
- Apply a dehydrator and wait 30 seconds for it to evaporate moisture.
- Apply the Rubber base primer layer with rubbing movements and add a little more base to create a smooth surface. Cure for 30 seconds.
- Press the pump and dispense the necessary amount of material.
- Apply FRAME gel in an architectural layer or lay it in the upper form or on the lower form (depending on the technique).
- Cure each nail for 30 seconds, then at the end put both hands under the lamp again for 1-2 minutes.
- Remove the tacky layer from FRAME gel and file the surface as necessary.
- Apply a No Sticky or Dark Story top coat and cure for 1-2 minutes.
Caution! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight (especially direct sunlight) as possible. Note that even on cloudy days, clouds allow a significant amount of ultraviolet radiation, which is sufficient for the material to polymerize. When painting tips, it is recommended to keep the working side of the UV lamp away from the technician. If the lamp is turned towards the technician while on, unwanted polymerization of the material on brushes and at the necks of open bottles may occur.
