• 36 W UV/LED Lamp
• 365nm - 405nm
• 30, 60, 90 low heat and a "stay on option"
• Stay on option great for doing tips (max of 5 mins before turning off to save battery life)
• 81 strategically placed LEDs for optimal curing
• Higher quality LEDs
• Removable metal base
• Sensor activated
• Muted sensor option
• Cures both UV/LED
• Battery usage: 140-150 min or 200mins on the low heat setting (90second)
• Low heat option is for those with sensitive or damaged nail plates
• Pedicure option: Small stands fold down to help lift the unit
• Soft matte finish
• Clean with 70% Isoproyl Alcohol ONLY
  
• 1-year limited warranty

INSTRUCTIONS:

CHARGING & INITIAL ACTIVATION

1. Plug in the unit and fully charge it (6-7 hours) before unplugging for use. Do not leave the unit plugged in overnight—unplug it once fully charged to maintain battery health. It is recommended to keep the lamp above 50% charge for battery longevity.
   
2. To turn on the unit, hold down the "Stay On" button for approximately 3 seconds.

TO ACTIVATE MOTION SENSOR SETTING:

1. Select desired cure time by pressing the 30, 60 or 90 second button options.
2. Place the hand in the lamp to activate the sensor and start the timed curing cycle. If hand is removed before the timed cycle has finished, the timer will reset to the last chosen time cycle.

TO ACTIVATE "STAY ON" SETTING:

1. Press the "Stay On" button to activate a constant cure cycle. This is ideal for tables with built in lamp compartments, "back and forth" curing while working on a client, and creating your press-on's or display tips. PLEASE NOTE: The "Stay On" option will run your lamp for a maximum of 5 minutes on this setting. This is to help extend the life of your lamp.

TO WAKE FROM "DEEP SLEEP" MODE:

1. When the unit is plugged in, after being turned off it will go into "deep sleep" mode to preserve the life of the battery. To wake the unit, press one of the time setting buttons, then press the Power/ "Stay On" button. The unit will then turn on and is ready for use.

PLEASE NOTE:

• CLEANING: Clean your LED Lamp with 70% Isopropyl Alcohol ONLY. Gently wipe down the unit with 70% Isopropyl Alcohol and avoid wiping over buttons & LED display screen to avoid any potential damage. Avoid the use of acetone or disinfectants.
• To avoid risk of fire, please always unplug your electrical units when not in use.
• Please inspect you lamp weekly to be sure there is no gel on the bulbs, which will inhibit curing. Despite popular belief, LED lamps do not last a lifetime.  With full time use, the expectancy is 1 1/2 - 2 years.

All orders are shipped:

• Next business day, excluding holidays, if the order is placed after 10:00 AM (EST)
• Same business day, excluding holidays, if the order is placed before 10:00 AM (EST)

Orders are processed and shipped Monday to Friday.

 CANADA SHIPPING:

• We use Canada Post, UPS, Canpar, Purolator and Flashbird carriers.
• The shipping cost depends on the weight of your order and is calculated automatically at checkout ($8.95 CAD - $50 CAD).
  
  Local Delivery (Greater Toronto Area & Greater Montreal Area):
  

• Greater Toronto Area Delivery: $8.95 CAD
• Greater Montreal Area Delivery: $10.95 CAD
  
  Important Restrictions:
  

• We do not ship Akzentz/Luxio products to Alberta.
• Flammable liquids can only be shipped within the Greater Toronto Area & Greater Montreal Area. Otherwise, they are available for pickup only.

USA SHIPPING:

• We use USPS and UPS services.
• The shipping cost depends on the weight of your order and is calculated automatically at checkout ($17 CAD - $70 CAD).
  
  We are not responsible for shipping delays, additional fees, or lost parcels due to incorrectly provided shipping addresses.