DARK Stamping polish #47 Green Chameleon
A high-quality stamping polish that transfers effortlessly with the right technique. It features rich pigmentation and a wide color palette. The formula is not too thick, ensuring compatibility with all types of stamps.
APPLICATION METHOD:
- Perform a manicure, apply a base coat, gel, or color, and cure in a lamp.
- If a sticky layer remains, remove it using gel cleanser.
- Apply stamping polish onto the plate, scrape off the excess using a scraper, and transfer the design to the stamp.
- Transfer the design from the stamp to the nail using a rolling or even motion.
- Seal with a top coat.
-
Tip: If the top coat spreads or distorts the design, apply a thin layer of clear base, cure it, and then apply the top coat.
COMMON REASONS WHY THE DESIGN MAY NOT TRANSFER PROPERLY:
-
Thickened polish – Ensure the stamping polish is fresh and fluid. Load enough polish onto the brush to fully cover the design.
-
Slow application – Apply the polish to the plate with 1-2 swift strokes. The longer you take, the worse the transfer will be, as the polish dries quickly in the air.
-
Scraper technique – Hold the scraper at a 45-degree angle and avoid pressing too hard to prevent removing too much polish from the design.
-
Scraping speed – Work quickly, using 2-4 firm strokes, and avoid sweeping across the entire plate unnecessarily.
-
Stamping speed – Immediately after scraping, set down the scraper and pick up the stamp without delay—stamping polish dries fast.
-
Stamping pressure – Transfer the design with a gentle rolling motion. Do not press the stamp too hard against the plate, as excessive pressure will cause more polish to stay on the plate instead of transferring.
